• Suitable for insulation Class I luminaries
• Long life time, robust protection against vibration and temperature
• Provides high surge protection up to 20kV/20KA for all lighting technologies
• Also protects electronic fluorescent and HID ballasts as well as other electronic products
The LED surge protection device is designed to provide electrical immunity in the worst environment outdoor locations. The outdoor LED luminaries is under the best protection against lighting and switching surge event by an all phase protection for L/N, L/G, and N/G . It conforms to the new Elevated Electrical Immunity Requirement requested by DOE and MSSLC.
The surge protector is required to be used in parallel. The small QR-SPD07-22HV fits the current design requirements for the new technology luminaries, like an LED lighting engine for outdoor lighting.
|Continue Voltage UC(V)||IP Rating||Protection Class||LED Indicator||Including Impedance||Open-circuit Voltage Uoc(KV)||Protecting Voltage Up(L-N/KV)||Protecting Voltage Up(L-PE/KV)||Protecting Voltage Up(N-PE/KV)||I-surge (KA)||Strike||Imax(KA) 1 time|
|Maximum Continuous RMS Voltage AC:||550Vac|
|Maximum Clamping Voltage (8/20us100A):||1500V@100A|
|Maximum Peak Current:||10kA(8/20us standard wave)|
|Wiring:||14Gauges stranded wire,105℃,600V|
|Wire connections:||White and Black:12mm skinned L=143~163mm 12mm skinned with ф4.2mm ground lug /DJ4305 L=151~171mm|
|Ambient Temperature(Operating):||-40 ℃-85℃|
|Life,Warranty:||5 Years (Failed not by the surge)|
The QR-SPD07-22HV surge protection device may produce sparks and burns in some kind of failure state (such as MOV failure or prolonged work under the condition of greater than maximum working voltage), it must be installed inside the luminaires with certain protective function.