• Suitable for insulation Class I luminaries
• Long life time, robust protection against vibration and temperature
• Provides high surge protection up to 10kV/10KA for all lighting technologies
• Also protects electronic fluorescent and HID ballasts as well as other electronic products
The LED surge protectors is a low-cost single-phase surge protection device designed for outdoor lighting, with the protection function of L to N ,L to Ground, N to Ground, and in accordance with IEEE C62.41 Category C Low Exposure. The unit was designed to meet new design requirements for luminaries using LED light engines.
The surge protector is required to be used in parallel. With the characteristics of not limited to the load power and the relatively smaller size of the installation requirements than similar products, it is more suitable for the current LED lighting design requirements.
|Continue Voltage UC(V)||IP Rating||Protection Class||LED Indicator||Including Impedance||Open-circuit Voltage Uoc (KV)||Protecting Voltage Up(L-N/KV)||Protecting Voltage Up (L-PE/KV)||Protecting Voltage Up (N-PE/KV)||I-surge (KA)||Strike||Imax(KA) 1 time|
|Maximum Continuous RMS Voltage AC:||550Vac|
|Maximum Clamping Voltage (8/20us100A):||1500V@100A|
|Maximum Peak Current:||10kA(8/20us standard wave)|
|Wiring:||14Gauges stranded wire,105℃,600V|
|Wire connections:||White and Black:12mm skinned L=143~163mm 12mm skinned with ф4.2mm ground lug /DJ4305 L=151~171mm|
|Ambient Temperature(Operating):||-40 ℃-85℃|
|Life,Warranty:||5 Years (Failed not by the surge)|
The QR-SPD07-10 surge protection device may produce sparks and burns in some kind of failure state (such as MOV failure or prolonged work under the condition of greater than maximum working voltage), it must be installed inside the luminaries with certain protective function.