Chinese

QR-SPD06-LN-15

QR-SPD06-LN-15
Certified by TUV, CE, CQC, Qiyutech SPD06-LN-15 protector is fully functional and features 100,000 Hours life, T3 protection class, LED indicator, 40 - 70 °C temperature, 30 strike, 15 Imax 15KA, I-surge 7.5KA), 275VAC continue voltage, IP20 rating, and 5-95% humidity.
  • Applications
  • Technical data & Specification
  • Outline drawings

They are employed at Flood lighting, Tunnel lighting, Traffic lighting. They are of vast applications in digital signaling. 


Wiring diagram Insulation Class II application

SPD06-LN-15

We at QIYU Technologies master in our surge protection devices that can withstand the harshness of nay voltage whatsoever. Our SPD06-LN-15 surge protector has been finely manufactured with thermally protected metal oxide varistors commonly referred to as MOVs. The configuration is fused with a gas discharge tube that grants sharp clamping or cutting down of striking voltages. These gadgets are backed by IEC 61643-11/EN 61643-11 testimonials.

It is highly suitable for use in any sort of luminaire with Class II insulation hence is connected parallel in a circuit. This IP20 rated gizmo offers maximum discharge current of the order 15kA. Although the LED indicator is absent, they are exemplary for outdoor lighting installations.

Their maximum operating voltage lies between 275VAC.Besides, the ambient temperature extends from -40 to 70°C.

Continue Voltage UC(V)IP RatingProtection ClassLED IndicatorIncluding Impedance Open-circuit Voltage   Uoc(KV)Protecting Voltage Up(L-N/KV)Protecting Voltage Up(L-PE/KV)Protecting Voltage Up(N-PE/KV)I surge (KA)StrikeImax(KA) 1 time Certificate
275IP20T3NoYes151.5————7.53015TUV, CE

Typical features as below:

  • IEC 61643-11/EN 61643-11 Approved

  • 15kA max discharge current

  • Suitable for use in luminaire with Class II insulation

  • IP20 rated

  • Parallel connected

Electrical specifications

  SpecificationsParameterValueUnitCondition
Certifications


TUV, CE
Classification
Class III  (T3)
Acc. IEC61643-11
Protection mode
Diff. mode

Max. continuous operating voltageUc (L-N)275VAC50 … 60 Hz
Temporary overvoltage TOVUT337VLV system fault:255 V x 1.32 at tt = 120 m,
Power grids
TN, TT, IT
Incl. all TN varieties TN-C, TN-C-S, TN-S
Nominal  discharge currentIn  (L-N)7.5kA@ Uoc=15KV;internal resistance=2Ω
Max. voltage protection level at InUp  (L-N)1,5kV@ Uoc=15KV;internal resistance=2Ω
Open-circuit voltageUoc15kV1.2 / 50μS
Backup fuse
8Amax., gG fuse
End of life indication
yes
Optical, light ON: SPD is functional. Light OFF: SPD has reached end-of-life

 Other specifications

SpecificationsParameterValueUnitCondition
Surge withstand capability
1strikemax. at 10 kA,8/20μS

30strikesmin. at 5 kA,8/20μS

50strikesmin. at 3 kA8/20μS,
Nominal  current
4ARated load current at 50 … 60 Hz
Power consumption
1.1Wmax. at Uc = 275VAC; Load current=4A
Suitable for luminaires
Class II
Insulation Class acc. IEC60598

    Protection levels Up

IC  8/20 μsDifferential mode U2Common mode U1/U2
7.5kA≤1500 V

SPD06-LN-15

Environmental conditions

Specification itemValueUnitCondition
Ambient temperature-40…70°C
T case-max.80°CMeasured at Tc-point
Storage temperature-40…85°C
Relative humidity5…95%Non-condensing
Suitable for outdoor luminairesYes
Built-in only

   Lifetime

Specification itemValueUnitCondition
Lifetime100,000hoursMeasured @ Tcase-max with min 90% survival



 SPD06-LN-15SPD06-LN-15

Specification itemValueUnit
Mounting length55mm
Overall length84mm
Case Width30.8mm
Case Height32.6mm
Fixing diameterM8*10mm
Max. screw torque0.6Nm
Weight
g

 Wiring

Specification itemValueUnitCondition
Connector typePush-in
Single wire only
Wire diameter0.5…2.5mm2Solid and stranded
Wire strip length8…10mm



Design Center

Can not find what you are looking for? please try our design center

Download

power factor correction equipment catalogue 3574kb

Copyright © Shanghai Qiyu Optoelectronics Technology Co., Ltd. All Rights Reserved | Sitemap

-->

Click here to chat
support