Chinese

QR-SPD06-2IP

QR-SPD06-2IP
The high-tech lighting SPD of Qiyutech features 100,000 Hours life, IP65 rating, led indicator, T3 protection class, 40 - 70 °C temperature, Imax 10kA, I-surge 5 kA, IP20 rating, 10kA current, 5-95% humidity, and TUV, CE, CQC certification. Strict quality checking guaranteed!
  • Applications
  • Technical data & Specification
  • Outline drawings

They are employed in street lighting, digital signage, floodlighting, outdoor and commercial LED lighting. They are used in traffic lighting, tunnel lighting, roadway lighting and parking garage lighting.


Wiring diagram Insulation Class I application

SPD06-2IP

Wiring diagram Insulation Class II application

SPD06-2IP

QR-SPD06-2IP SPD is an effective combination of metal oxide varistors and a regulated gas discharge tube. This mechanism provides not only a tapered clamping voltage but also a very high surge withstand capacity. There is an inbuilt LED that acts as a replacement notification. 10kA maximum discharge current is granted by this protector. It is also suitable for outdoor luminaires. The ambient temperature ranges from -40 to +70 °C.


This product of QIYUtech is backed by TUV. CE, CQC certifications. Our surge protector is connected parallelly in a circuitry.  It is dust-tight and water-resistant. These surge protector devices are available with Class I or Class II. These two species grant insulation and wire or screw terminal connections.

Furthermore, the product is under IEC 61643-11/EN 61643-11 Standards.


Continue Voltage UC(V)IP RatingProtection ClassLED IndicatorIncluding Impedance Open-circuit Voltage   Uoc(KV)Protecting Voltage Up(L-N/KV)Protecting Voltage Up(L-PE/KV)Protecting Voltage Up(N-PE/KV)I surge (KA)StrikeImax(KA) 1 time Certificate
275IP65T3YesYes101.52253010CQC, TUV, CE


Technical Information:

 SpecificationsParameterValueUnitCondition
Certifications


TUV, CE, CQC
Classification
Class III
Acc. IEC61643-11
Protection mode
Diff. mode & Comm. mode

Max. continuous operating voltageUc (L-N)277VAC50 … 60 Hz
Temporary overvoltage TOVUT1505VHV system fault: 1200 V+305, at tt = 200 ms, TT (L-PE)
Temporary overvoltage TOVUT402.6VLV system fault: 305 V x 1.32 at tt = 120 m, TT 、TN
Temporary overvoltage TOVUT528VLV system fault: 305 V x √3 at tt = 5 s, TT 、TN
Power grids
TN, TT,
Incl. all TN varieties TN-C, TN-C-S, TN-S
Nominal  discharge currentIn  (L-N)5kA@ Uoc=10KV, internal resistance=2Ω
Nominal  discharge currentIn  (L-GND)5kA@ Uoc=10KV;internal resistance=2Ω
Nominal  discharge currentIn  (N-GND)5kA@ Uoc=10KV;internal resistance=2Ω
Max. voltage protection level at InUp  (L-N)1,5kV@ Uoc=10KV;internal resistance=2Ω
Max. voltage protection level at InUp  (L-GND)2kV@ Uoc=10KV;internal resistance=2Ω
Max. voltage protection level at InUp  (N-GND)2kV@ Uoc=10KV;internal resistance=2Ω
Open-circuit voltageUoc10kV
Backup fuse
8Amax., gG fuse
End of life indication
yes
Optical, light ON: SPD is functional. Light OFF: SPD has reached end-of-life
Max earth leakage current at Uc
50µAMax. rms, to GND

 Other specifications

SpecificationsParameterValueUnitCondition
Surge withstand capability
1strikemax. at 7.5KA

30strikesmin. at 5kA

50strikesmin. at 3kA
Nominal  current
4ARated load current at 50 … 60 Hz
Power consumption
1.1Wmax. at Uc = 277VAC; Load current=4A
Suitable for luminaires
Class I、Class II
IEC60598Insulation Class acc. IEC60598

    Protection levels Up

IC  8/20 μsDifferential mode U2Common mode U1/U2
7.5kA≤1500 V≤2000 V / 1500 V


SPD06-2IPSPD06-2IP

Environmental conditions

Specification itemValueUnitCondition
Ambient temperature-40…70°C
Tcase-max.80°CMeasured at Tc-point
Storage temperature-40…85°C
Relative humidity5…95%Non-condensing
Suitable for outdoor luminairesYes
Built-in only

 Lifetime

Specification itemValueUnitCondition
Lifetime100,000hoursMeasured @ Tcase-max with min 90% survival



Outline Dimensions:

SPD06-2IPSPD06-2IP

dimensions in mm

Specification itemValueUnit
Mounting length70.5mm
Overall length70.5mm
Case Width42.5mm
Case Height33mm
Fixing hole diameterM4(60*32)mm
Max. screw torque0.45Nm
Weight125gr

  Wiring

Specification itemValueUnitCondition
Connector typeCabel
Single wire only
Wire diameter3*1mm2Solid and stranded
Wire strip length8…10mm



Design Center

Can not find what you are looking for? please try our design center

Download

power factor correction equipment catalogue 3574kb

Copyright © Shanghai Qiyu Optoelectronics Technology Co., Ltd. All Rights Reserved | Sitemap

-->

Click here to chat
support