Chinese

QR-SPD06-1IP

QR-SPD06-1IP
QR-SPD06-1IP surge protectors comes with 40 - 70 °C temperature, 30 strike, Imax 10 KA, I surge 7.5KA, 10kV/10kA nominal current, 5-95% relative humidity, IP65 rating, led indicator, T3 protection class, 100,000 Hours life, and TUV, CE, CQC certification. Strict quality checking guaranteed!
  • Applications
  • Technical data & Specification
  • Outline drawings

They find uses in several areas that deal with lighting such as street, parking garages, roadway, outdoor commercial LED Lighting, traffic lighting, Digital signage, Tunnel lighting, and Flood lighting.


Wiring diagram Insulation Class I application

SPD06-1IP

Wiring diagram Insulation Class II application

SPD06-1IP

This surge protector is thermally protected with a very high surge withstand capacity. They have an inbuilt LED indicator which notifies the user when it is time to replace the product. They over just the right amount of impedance. This device is recognized by international and national standards. They offer both parallel and series connection. They give extraordinarily high line-to-earth resistance. They guarantee 15kA of discharge current along with minimum power consumption. The maximum operating voltage extends to 277VAC.

In addition, they have a life expectancy of 100000 hours. The ambient temperature lies between -40 to 70 °C

Continue Voltage UC(V)IP RatingProtection ClassLED IndicatorIncluding Impedance Open-circuit Voltage   Uoc(KV)Protecting Voltage Up(L-N/KV)Protecting Voltage Up(L-PE/KV)Protecting Voltage Up(N-PE/KV)I surge (KA)StrikeImax(KA) 1 time Certificate
275IP65T3YesYes151.5227.53015CQC, TUV, CE


Technical Information:

 SpecificationsParameterValueUnitCondition
Certifications


TUV, CE, CQC
Classification
ClassI or Class II
Acc. IEC61643-11
Protection mode
Diff. mode & Comm. mode

Max. continuous operating voltageUc (L-N)277VAC50 … 60 Hz
Max. continuous operating voltageUc (L-GND)277VAC50 … 60 Hz
Max. continuous operating voltageUc (N-GND)277VAC50 … 60 Hz
Temporary overvoltage TOVUT1505VHV system fault: 1200 V+305, at tt = 200 ms, TT (L-PE)
Temporary overvoltage TOVUT402.6VLV system fault: 305 V x 1.32 at tt = 120 m, TT 、TN
Temporary overvoltage TOVUT528VLV system fault: 305 V x √3 at tt = 5 s, TT 、TN
Power grids
TN, TT
Incl. all TN varieties TN-C, TN-C-S, TN-S
Nominal  discharge currentIn  (L-N)7.5kA@ Uoc=15KV;internal resistance=2Ω
Nominal  discharge currentIn  (L-GND)7.5kA@ Uoc=15KV;internal resistance=2Ω
Nominal  discharge currentIn  (N-GND)7.5kA@ Uoc=15KV;internal resistance=2Ω
Max. voltage protection level at InUp  (L-N)1,5kV@ Uoc=15KV;internal resistance=2Ω
Max. voltage protection level at InUp  (L-GND)2kV@ Uoc=15KV;internal resistance=2Ω
Max. voltage protection level at InUp  (N-GND)2kV@ Uoc=15KV;internal resistance=2Ω
Open-circuit voltageUoc15kV
Backup fuse
8Amax., gG fuse
End of life indication
yes
Optical,  light ON: SPD is functional. Light OFF: SPD has reached end-of-life
Max earth leakage current at Uc
50µAMax. rms, to GND

 Other specifications

SpecificationsParameterValueUnitCondition
Surge withstand capability
1strikemax. at 10 kA

30strikesmin. at 7.5 kA

50strikesmin. at 5 kA
Nominal  current
4A额定负载电流 (50-60Hz)Rated load current at 50 … 60 Hz
Power consumption
1.1Wmax. at Uc = 277VAC; Load current=4A
Suitable for luminaires
Class I, Class II
IEC60598Insulation Class acc. IEC60598

 Protection levels Up

IC  8/20 μsDifferential mode U2Common mode U1/U2
7.5kA≤1500 V≤2000 V / 1500 V

 SPD06-1IPSPD06-1IP

Environmental conditions

Specification itemValueUnitCondition
Ambient temperature-40…70°C
Tcase-max.80°CMeasured at Tc-point
Storage temperature-40…85°C
Relative humidity5…95%Non-condensing
Suitable for outdoor luminairesYes
Built-in only

   Lifetime

Specification itemValueUnitCondition
Lifetime100,000hoursMeasured @ Tcase-max with min 90% survival



Outline Dimensions:

SPD06-1IPSPD06-1IP

 dimensions in mm

Specification itemValueUnit
Mounting length70.5mm
Overall length70.5mm
Case Width42.5mm
Case Height33mm
Fixing hole diameterM4(60*32)mm
Max. screw torque0.45Nm
Weight125gr

  Wiring

Specification itemValueUnitCondition
Connector typeCabel
Single wire only
Wire diameter3*1mm2Solid and stranded
Wire strip length8…10mm



Design Center

Can not find what you are looking for? please try our design center

Download

power factor correction equipment catalogue 3574kb

Copyright © Shanghai Qiyu Optoelectronics Technology Co., Ltd. All Rights Reserved | Sitemap

-->

Click here to chat
support